How to extend the service life of corn processing equipment?

　　How to extend the service life of corn processing equipment, food processing manufacturers need a lot of money to buy a set of corn equipment, and how to extend the service life of the equipment is a concern of corn processing factories. The operation of corn equipment requires a long period of time, because if the operation is not standardized, and the equipment is not regularly maintained and repaired, it is easy to cause equipment failure. Once the equipment fails, the service life of the equipment will be affected. Therefore, in the daily maintenance and repair of complete sets of corn processing equipment, how to reduce the wear and tear between equipment parts and prolong the service life of the equipment, followed by their small-scale deep processing equipment manufacturers can understand the use of their machines and equipment by extending the service life of the equipment. process.

　　For the environment of processing equipment, attention should be paid to keeping it ventilated and dry to prolong its service life. In addition, the light-emitting head of the photoelectric switch should be cleaned to ensure its reliable operation, and the dust in the electronic control box should be cleaned to prevent electrical faults such as short circuit or poor contact, making the equipment with electrical faults difficult to use.

　　Before use, the operator should regularly check the screws of each part to avoid any loosening, which could lead to potential safety hazards. At the same time, the electrical parts should pay attention to waterproof, moisture-proof, anti-corrosion and other matters to ensure the cleanliness of the electrical control box and terminals and prevent the occurrence of electrical failures. When closed, the two heat sealing device bodies should be in the open position to prevent packing of the packaging material.

　　After the corn equipment has been used for a period of time, impurities are often left in the room, which requires cleaning, maintenance, general cleaning and maintenance. Attention should be paid to cleaning the turntable and feeding door, as well as cleaning the feeding port. These places are more prone to clogging the grains of multigrain.

　　In the production of corn deep processing equipment, the comprehensive management of equipment operation is strengthened. Of course, the motor strictly implements the responsibility system. Each motor observes the shift time of the monitor and quantitatively checks the maintenance personnel, and finds problems in a timely manner. In order to ensure the integrity of the operational control system of the corn processing equipment, the integrity of each line of electrical components controlled by the secondary motor to ensure regular inspection and maintenance of short circuit overcurrent protection devices is regularly verified to ensure reliable sensitive operation, so the motor is always in good running condition.

　　Only by doing a good job in the maintenance of processing equipment can we ensure the safe, lasting and efficient use of equipment. Don't neglect routine maintenance of corn equipment because of monotonous work. If lack of maintenance leads to equipment failure, there will be even greater losses. After that, in addition to daily inspection and maintenance, the corn equipment usually needs to be overhauled once a year. During the annual overhaul, the motor is disassembled and maintained, the bearing is cleaned, refueled or replaced, the insulation monitoring, and the perfect cooling system, etc. To ensure that the motor is in good condition . In short, we must prevent all problems and make grain processing plants do a better job of production.

　　For more knowledge about the grain processing equipment industry, you can pay attention to China Win Tone Machinery: rice processing equipment, millet processing equipment, corn processing equipment, maize milling machinery and sorghum processing equipment: http://www.wintonemachinery.com/